• <nav id="8iqys"><strong id="8iqys"></strong></nav>
    <dd id="8iqys"></dd>
    "

    ✅庄闲和✅㊣全球最大,最信誉的线上综合平台✅庄闲和✅千款游戏,砖石级服务,庄闲和,欢迎各界玩家加入体验!

  • <nav id="8iqys"><strong id="8iqys"></strong></nav>
    <dd id="8iqys"></dd>
    "
    MEMS Test - Pick & Place Test Handler - SPEA

    Pick&Place Test Handler

    Up to 33,000 UPH. Full configurability.

    SPEA Pick & Place Test Handler - SPEA

    SPEA Test Handlers are designed to perform the high-throughput pick&place handling of IC components (packaged, or in strip/wafer frame) during the final test phase.

    Their modular design is open to compose a variety of input / output media configurations, to best fit with your process, with the possibility to modify the configuration also at your site, by retrofitting different input / output modules:

    • Input from tray, wafer/strip frame, tape, or bowl feeder
    • Output on tray, wafer/strip frame, tape or box

    Mechanical architecture is based on full linear motion technology, with controlled axis acceleration and speed, to guarantee fast and accurate handling. Motion profiles and contacting mechanism minimize the force applied to the devices: H3580 can handle MEMS devices with no extra shock to their internal micromechanical structure.

    Very high parallelism

    • 1-50 pickups per head
    • Quick pickup pitch reconfiguration
    • Independent pickup actuation
    • up to 392x parallel contacting and testing

    Fast, gentle handling

    • 2 motorized heads with pickups and vision unit
    • Frictionless motion with linear motors
    • Controlled axis motion profile curve for soft device pick and releasing

    Lowest jam rate: 1:10,000

    • Automatic compensation of tray defects (shape, planarity, improper dimensions)
    • Device auto-alignment and presence verification inside the contacting unit
    MEMS Test Cell - SPEA

    Wide range of test units, from MEMS to Power device

     

    H3580 is complemented by a wide range of test units for ASICs, Power or MEMS devices, to combine in a single test cell all the elements of handling, contacting, physical stimulus and complete testing and calibration of MEMS or other IC devices.

    Multiple stimuli can be combined in a single test unit, to test combo MEMS, such as environmental sensors (pressure + humidity + gas + temperature) or navigation sensors (accelerometer + gyroscope + compass).

    The test area can be easily reconfigured on field with different test units, while the configuration of multi-stage test units enhances the system productivity: up to 392 devices can be contacted and tested simultaneously, offering the highest throughput.

     

    Learn more about MEMS Test Cells >

    Test at temperature

     

    Temperature conditioning is available for test at ambient, hot, cold, with pre-heating option to keep the best throughput.

    A fast temperature change mechanism allows for a single-insertion test at different temperatures: the device can remain in the same pocket while it is tested at the required temperature values, in sequence. This lowers the overall costs, reducing in number the handling operations required, while guaranteeing higher calibration precision and easier device traceability.

    • Temperature range: -65 to +200°C
    • temperature accuracy ± 1°C
    • temperature stability ± 0.5 °C
    • No defrost needed for intervention on the sockets
    • 24 hours/day working without interruption
    • Accurate temperature control at full temperature range
    • Controlled ambient temperature
    • Precise tracking of thermal performance parameters
    • Temperature monitoring per site

    Contacting

     

    SPEA handlers are complete of all the modules required to interface and contact the devices under test:

    • precise and reliable single-frame presser contacting
    • conversion kit for standard and custom packages, down to 1x1x0.5mm size
    • fast package changeover (<5 minutes)

    Sockets and contacting units are developed in-house by SPEA, for the most common IC packages (with or without leads) as well as for custom packages, to provide the best performance in MEMS testing:

    • Low-Force Contacting
    • High-efficiency thermal transfer with DUT
    • Dead-bug or live-bug contacting units
    • Customizable DUT presser tip shape
    • Device Aligner
    • Temperature sensors on contactors
    MEMS Test Handler - Pick & Place - SPEA

    Optical inspection

    The handler is equipped with different vision units (top, bottom, 5S), to perform optical test, guarantee device traceability, prevent the risk of jam:

    Test Handler - 2D Reader - SPEA

    Unit level traceability

    A vision unit scans all the devices in input, identifying each DUT by 2D code reading. All the data related to the DUT are then stored inside the handler database, and can be used by the factory MES.

    Test Handler - Package integrity - SPEA

    Package integrity inspection

    Every device is inspected to detect any dimensional or cosmetic defect, lead irregularities, pad bridging or contamination.

    Test Handler - Jam prevention - SPEA

    Jam prevention

    The expected presence/absence of components can be verified on the input/output units, inside the sockets, on the pickups, at the different stages of the operation flow.

    MEMS Test Handler - Pick & Place - SPEA

    Easy maintenance and calibration

     

    SPEA handlers accurately handle the smallest devices with no need for external calibration tools:

    • Complete system auto-calibration in 7 minutes by top and bottom cameras
    • Complete calibration reports and datalog with automatic position control and warning
    • Automatic tray position identification and automatic compensation of tray misalignment/misshape
    • Fast pickup replacement
    • Fast contactor removal
    • Easy system accessibility

    Industry 4.0 compliant

     

    Data collection, analysis and reporting, preventive maintenance, full automation, make every SPEA handler an integrated part of your smart factory floor.

    The handler’s performances can be constantly monitored and analyzed by Archimede, a dedicated software designed to enhance performance, reduce production downtime, and optimize maintenance operations.

    Dynamic equipment tracking and management, anomaly detection and alert notifications, trend identification and failure prediction, are some of the features offered by Archimede. It is possible to set KPIs to analyze, display, export and print the handler production and process performance indexes.

    All machine-related raw data – such as hardware composition, operating logbooks and life parameters – are stored locally and available to be automatically sent to centralized data centers, smoothly interfacing with MES and SECS/GEM.

    Semiconductor Test - Industry 4.0 - SPEA

    Discover how H3580 can enhance your handling performance and efficiency

    Book now your free demo
    Europe, Asia, Americas: wherever you are, SPEA team will be happy to make you touch with your hands the advantages H3580 can bring to your test floor.
    Design & Code by dsweb.lab
    庄闲和